E-MU's 1616 PCI Digital Audio System delivers everything you need to produce audio on a PC with professional results- premium 24-bit/192kHz converters (112dB SNR A/D and D/A), hardware-accelerated effects and mixing, comprehensive sync options and seamless compatibility with your favorite PC audio/sequencer software. The MicroDock breakout box offers a total of 16 inputs and 16 outputs plus 32 channels of MIDI I/O, including two E-MU XTC Class-A ultra-low noise mic/line/hi-Z preamps with 48V phantom power and analog soft limiting circuit for clip protection. The 1616M PCI also ships with ASIO2 and WDM drivers for Windows XP and x64, as well as the E-MU Production Tools software bundle that includes E-MU's Proteus X LE, plus software by Steinberg, Ableton, IK Multimedia, and many more - everything you need to create, record, edit, master and burn your music.

• Premium 24-bit/192kHz converters - 112dB signal-to-noise ratio for pristine recording and playback of your tracks
• Hardware-accelerated effects - over 600 standalone and E-MU Power FX VST plug-in effects with no CPU overhead
• PatchMix™ DSP zero-latency hardware mixing and monitoring - with super-flexible patchbay - no external mixer needed
• Two E-MU XTC™ Class-A, ultra-low noise preamps (-127dBu) - Mic/Line and true Hi-Z inputs via Neutrik connectors, with analog soft limiter, 48V phantom power and 60dB of gain
• Compatibility with most popular audio/sequencer applications - ultra-low latency 24-bit/192kHz ASIO2, WDM and 64-bit drivers
• E-MU Production Tools Software Bundle - includes Cakewalk SONAR LE, Steinberg Cubase LE and Wavelab Lite, Ableton Live Lite 4 for E-MU, IK Multimedia AmpliTube LE and T-RackS EQ, Minnetonka diskWelder BRONZE, SFX Machine LT, plus E-MU's Proteus X LE Desktop Sound Module - everything you need to create, record, edit, master and burn is in the box

I/O Configuration

• Two E-MU XTC™ Ultra-low Noise Mic/Line/Hi-Z Preamps with Soft Limiter and 48V Phantom Power (-127dBu EIN)
• Four 1/4" Balanced Inputs
• Six 1/4" Balanced Outputs
• Turntable Input (w/ground lug and hardware RIAA preamp)
• 24-bit/192kHz ADAT In/Out (switchable to S/PDIF)
• 24-bit/192kHz coaxial S/PDIF Out (switchable to AES/EBU)
• Two sets of MIDI In/Out
• Stereo 1/8" Speaker Outputs (configurable from stereo to 5.1)
• Stereo Headphone Output

General

   Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
   Bit Depths: 24 bit I/O, 32 bit processing
   PCI Specification:
    - PCI 2.2 Compliant
 - Form Factor: Universal Keyed, Short PCI Card
 - 3.3V I/O, 5V Tolerant
 - PCI Bus-Mastering DMA subsystem reduces CPU usage
 
   E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
   Hardware-accelerated, 32-channel mixing, and multi-effects processing
   Zero-latency direct hardware monitoring w/effects
   ASIO2, WDM/MME/DirectSound, x64 Drivers
   EDI (E-MU Digital Interface) proprietary 64-channel audio link over CAT-5 cable
   Anti-Pop speaker protection minimizes noise during power on/off
   Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Analog Line Inputs (4)

   Type: servo-balanced, DC-coupled, low-noise input circuitry
   A/D converter: PCM1804
   Level (software selectable):
    - Professional: +4dBu nominal, 20dBu max (balanced)
 - Consumer: -10dBV nominal, 6dBV max (unbalanced)
 
   Frequency Response (20Hz-20kHz): +0.0/-.03dB
   Dynamic Range (1kHz, A-weighted): 112dB
   Signal-to-Noise Ratio (A-weighted): 112dB
   THD+N (1kHz at -1dBFS): -102.5dB (.0007%)
   Stereo Crosstalk (1kHz at -1dBFS): < -120dB

Analog Line Outputs (6)

   Type: balanced, AC-coupled, 2-pole low-pass differential filter
   D/A converter: CS4392
   Level (software selectable):
    - Professional: +4dBu nominal, 20dBu max (balanced)
 - Consumer: -10dBV nominal, 6dBV max (unbalanced)
 
   Frequency Response (20Hz - 20kHz): 0.0/-.06dB
   Dynamic Range (1kHz, A-weighted): 112.5dB
   Signal-to-Noise Ratio (A-weighted): 112.5dB
   THD+N (1kHz at -1dBFS): -98dB (.0012%)
   Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Combo Microphone Preamplifier/Hi-Z/Line Inputs (2)

   Type: E-MU® XTC™ combo mic preamp and Hi-Z/line input w/ Soft Limiter
   Gain Range: +60dB
   Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB
   Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB
   Hi-Z Line Input:
    - Input Impedance: 1Mohm
 - Max Level: +18dBV (20.2dBu)
 - Dynamic Range (A-weighted, 1kHz, min gain): 112.5dB
 - Signal-to-Noise Ratio (A-weighted, min gain): 112dB
 - THD+N (1kHz at -1dBFS, min gain): -102dB (.0008%)
 
   Microphone Preamplifier:
    - Input Impedance: 1.5Kohms
 - Max Level: +6dBV (+8.2dBu)
 - EIN (20Hz-20kHz, 150ohm, unweighted): -127dBu
 - Signal-to-Noise Ratio (A-weighted, min gain): 112.5dB
 - THD+N (1kHz at -1dBFS, min gain): -103dB (.0007%)
 - Phantom Power: 48V
 - Soft Limiter: 5dB max compression (software selectable)
 

Headphone Amplifier

   Type: linear power amplifier
   D/A converter: CS4392
   Gain Range: 85dB
   Maximum Output Power: 50mW
   Output Impedance: 22ohms
   Frequency Response (20Hz-20kHz): +0.0/-0.07dB
   Dynamic Range (A-weighted): 112dB
   Signal-to-Noise Ratio (A-weighted): 112dB
   THD+N (1kHz, max gain): 600ohm load: -92dB
   Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB

Phono Input (stereo)

   Type: RIAA equalized phono input
   Maximum level:
    - Professional: 60mV RMS
 - Consumer: 15mV RMS
 
   Input Impedance: 47Kohm
   Frequency Response (20Hz - 20kHz): +0.1/-0.3dB
   Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB
   THD+N (1kHz, 15mV RMS input): -88dB (.004%)
   Stereo Crosstalk (1kHz at -1dBFS): < -80dB

Digital I/O

   S/PDIF:
     - 2 in/2 out coaxial (transformer coupled) 
  - 2 in/2 out optical (software switched with ADAT)
 - AES/EBU or S/PDIF format (software selectable)
 
   ADAT:
    - 8 channels, 24-bit @ 44.1/48kHz
 - 4 channels, 24-bit @ 88.2/96kHz (S-MUX compatible)
 - 2 channels, 24-bit @ 176.4/192kHz
 
   MIDI
    - 2 in, 2 out
 

Synchronization

   Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz
   External sample rate sync via
     - ADAT (44.1 - 192kHz)
 - Optical S/PDIF (44.1 - 96kHz)
  - Coaxial S/PDIF (44.1 - 192kHz)
 
   SMPTE/LTC/MTC (via optional Sync Daughtercard)
     - 24, 25, 30 drop-frame, 30 non-drop
 - SMPTE to MTC, MTC to SMPTE Conversion
  - SMPTE Striping
  - Flywheel/Jam/Regenerate
 


 Retail Box Contents

   E-MU 1010 PCI Card
   E-MU MicroDock
   EDI (E-MU Digital Interface) cable (3 meter)
   Universal power adapter
   MIDI breakout cable
   Quick Start installation guide
   E-MU Digital Audio Systems CD-ROM
    - Windows® XP and x64 Drivers
 - E-MU PatchMix DSP
 - E-MU Power FX
 - E-MU E-DSP Effects Library - Owner's Manual and Tutorials
 
   E-MU Production Tools Software Bundle CD-ROM
    - Cakewalk SONAR LE
 - Steinberg Cubase LE
 - Ableton Live Lite 4 for E-MU
 - Steinberg Wavelab Lite
 - IK Multimedia AmpliTube LE
 - IK Multimedia T-RackS EQ
 - Minnetonka diskWelder BRONZE
 - SFX Machine LT
 - E-MU Proteus X LE (over 1000 sounds included)
 


 Minimum System Requirements

   Intel® or AMD® processor - 1 GHz or faster
   Intel, AMD or 100% compatible motherboard & chipset
   Microsoft® Windows® XP (SP 2) or Windows XP x64
   256MB System RAM
   900MB of free hard disk space for full installation
   PCI 2.1 compliant slot for E-MU 1010 PCI card
   CD-ROM/CD-RW or DVD-ROM drive required for software installation
   XVGA Video (1024 X 768)

For added piece of mind, our range of care plans will allow you to relax knowing that if you have a system failure that can’t be rectified over the phone you can return the machine back to us to diagnose the fault for you...

Q. I have discarded my box and packaging materials - what can I do?

A. We can send you a shipping carton and packing materials. The charges are:

• UK Mainland £19.99
• Scotland & Highlands £24.99
• Ireland North & South £24.99

Q. How much will it cost to have the PC collected?

A. If you are unable to return your PC to us then we can send a courier to collect it on your behalf. The charges are:

• UK Mainland £19.99
• Scotland & Highlands £29.99
• Ireland North & South £39.99

Q. How much will it cost to return the computer back to me?

A. Once your computer is repaired we will return it to you free of charge for the stated period of your chosen care plan.

Q. I live outside of the UK, can I be covered by your care plan?

A. For all orders outside the UK please contact us to discuss a bespoke care plan.