Specification

Lynx Studio LynxTwo C

Building on the award winning performance of the LynxONE, the LynxTWO incorporates the latest generate converter technology to create a device capable of precision never before achieved in a PCI audio card. With performance that exceeds stand-alone converters, LynxTWO sets new standard for signal purity, versatile synchronization, powerful hardware mixing, and extensibility to support a variety of multichannel formats including ADAT and TDIF.

Model Options

• C Model Six Inputs / Two Outputs

Features

• 200kHz sample rate / 100kHz analog bandwidth
• Six 24-bit balanced analog inputs and two 24-bit balanced analog outputs ("C" Model)
• +4dBu or -10dBV line levels selectable per channel pair
• 24-bit AES3 or S/PDIF I/O with full status and subcode support
• Sample rate conversion on digital input
• Non-audio digital I/O support for Dolby Digital and HDCD
• 32-channel / 32-bit digital mixer with 16 sub outputs
• Multiple dither algorithms per channel
• SMPTE time code read and generator
• Composite video genlock
• Word, 256 Word, 13.5MHz or 27MHz clock sync
• Extremely low-jitter tunable sample clock generator
• Dedicated clock frequency diagnostic hardware
• Multiple-board audio data routing and sync
• Two Lstream ports support 8 additional I/O channels each
• Compatible with LStream modules for ADAT, TDIF and AES/EBU standards
• Zero-wait state, 16-channel, scatter-gather DMA engine

Specifications

Analog I/O

• Type: Electronically balanced or unbalanced, XLR connectors on L2Audio Cable
• Level: +4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs
• Input Impedance: Balanced mode: 24 kohms , Unbalanced mode: 12 kohms
• Output Impedance: Balanced mode: 100 kohms, Unbalanced mode: 50 kohms
• Output Drive Capability: 600 ohms, impedance, 0.2 µF capacitance
• A/D and D/A Type: 24-bit, multi-level, delta-sigma
• Sample Rates: 8 kHz to 200 kHz, including all standard rates with variable adjustment
• Bit Depth: 8, 16, 24 or 32 bit file types
• On-board Buffer Size: 16 Kbytes per input and output stream (mono or stereo)

Digital I/O

• Number: One input and one output
• Type: AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync Cable
• Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Sample Rate Conversion: Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range
• Bit Depth: 8, 16, 24 or 32 bit file types
• Control / Status: Complete subcode and channel status support
• On-board Buffer Size: 16 Kbytes per input and output stream (mono or stereo)

LStream Expansion Ports

• Number: One external and one internal
• Compatibility: Supports Lynx ADAT, TDIF, and other multichannel expansion modules
• Type: High-speed serial, eight channel input and output (each port), 24-bit data, 96kHz rate

SMPTE Time Code I/O

• Type: LTC receiver (in) and generator (out) , BNC connectors on L2Sync Cable
• Frame Rates: 24, 25, 29.97, 30 Hz - drop and non-drop
• Input Sync Rate: 1/30 to 80 times nominal frame rate
• Input Levels: 200 mV to 10V / 10Kohm
• Output Level: 1V / 75ohm

Clock I/O

• Number - External: one input and output, BNC connectors on L2Sync Cable
• Number - Internal: one input and output on board-mounted headers
• Level / Impedance: TTL (clock signals) / 1Vpp (video) 75ohm
• Type: Input: word clock, 256X word clock, 13.5 and 27 MHz video clocks, NTSC or PAL composite video; Output: word clock

On-board Digital Mixer

• Channel Capacity: 32 input channels, 16 sub outputs
• Resolution / Dither: 32-bit / TPDF, Shaped TPDF, or RPDF
• Monitor Mixing: Any input to multiple outputs
• Metering: Peak levels to -120 dB on all inputs and outputs

Connections

• Audio Port: Bracket-mounted 25-pin female D-sub connector for analog audio input and output
• Sync Port: Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out

Cables (Included)

• L2Audio Cable: 25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling
• L2Sync Cable: 15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75ohm coaxial cabling

System Requirements

• Windows 98 / ME / NT / 2000 Drivers
• Macintosh ASIO 2.0 Drivers

Inta Audio recommends the Lynx Studio LynxTwo C by Lynx Studio

The Lynx Studio LynxTwo C offers great value for money, features, build quality and reliability.

Related Products to the Lynx Studio LynxTwo C