Specification

R1 - Ribbon Microphone

Overview

The sE R1-Ribbbon is a beautiful piece of engineering. It’s single ‘Figure of 8’ polar pattern is derived from an incredibly fine 1.8 micron Aluminium membrane.

As such the R1 has a higher-than-normal frequency roll-off (at around 7KHz), and greater sensitivity, producing a more open and natural sound than you’d expect from a ribbon mic.

The R1 is ideally suited to most recording applications including electric guitar cabs, overhead drum micing, recording brass and woodwind instruments, strings and for commercial broadcast and voice-over.

The R1 is not so much a mic for specific applications but a mic that brings a different sound for ALL your applications.

It comes packaged in a tough, aluminium flightcase complete with shockmount.


Specification

Type: Passive

Element: 1.8µ aluminum ribbon

Frequency Response: 30 -15,000 Hz +/- 3dB

Sensitivity: -54dB 1v/pa±1 dB

Polar Pattern: Figure of 8

Impedance: = 300 Ohms

Max SPL: 135dB

Connector: 3-pin

Inta Audio recommends the SE Electronics R1 - Ribbon Microphone by SE Electronics

The SE Electronics R1 - Ribbon Microphone offers great value for money, features, build quality and reliability.

Related Products to the SE Electronics R1 - Ribbon Microphone