Specification

Rode NTG-1 Microphone

The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries.

The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Rode Boom pole.

The NTG-1 comes complete with mount and Rode windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional Rode accessories are available for more demanding applications

NTG-1 Features:

• Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction. Low weight: 105 grams approx. (3 oz.). Low handling noise. Supplied with a Rode stand mount, zip pouch and windshield. Designed & manufactured in Australia by Rode. Full 2 year guarantee.

NTG-1 Operation power:

• The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.

NTG-1 Operation output impedance:

• The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-1¡¯s output is balanced between pin 2 (hot), pin 3 (cold) and pin 1 is ground.

Acoustic principle:

• Line plus Gradient.

Directional pattern:

• Super-Cardioid.

Frequency range:

• 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance:

• 50 Ù

Signal noise ratio din iec 651:

• 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)

Equvalent noise:

• 18 dB SPL (per IEC651, IEC268-15)

Maximum spl:

• 139 dB (@ 1% THD into 1 kÙ)

Sensitivity:

• -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)

Dynamic range din iec 651:

• 121 dB (per IEC651, IEC268-15)

Power supply voltage:

• P48 Phantom, 44 V to 52 V

Current consumption:

• 3.5 mA

Output connection:

• 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)

Weight with battery:

• 105 g approx. (3.37 oz.)

Dimensions width:

• 217mm

Dimensions depth:

• 22mm

Dimensions height:

• 22mm

Inta Audio recommends the Rode NTG-1 Shotgun Condenser Microphone by Rode

The Rode NTG-1 Shotgun Condenser Microphone offers great value for money, features, build quality and reliability.

Related Products to the Rode NTG-1 Shotgun Condenser Microphone

Rode Stereo VideoMic Bag               £9.86 More from Rode

Sanken Stereo Shotgun Mic               £1,492.25 More from Sanken

Skytronic Electret Telescopic Microphone               £39.99 More from Skytronic

Audio Technica ATR55 Cardioid Condenser Shotgun Microphone               £51.00 More from Audio Technica