Rode Classic II Microphone
Machined from solid brass, hand polished, glass bead blasted and coated in satin nickel, this is a microphone with Class A valve circuitry that gives unmatchable warmth, clarity and sensitivity when critical vocal and instrument recording is required.
The Classic II when a Classic performance is needed.
- Class A valve circuitry
- Dedicated power supply
- 6072 twin triode
- New "edge-terminated" 1" gold sputtered diaphragm
- Custom designed Jensen transformer
- -10dB and -20dB Pads (switched from power supply)
- 2 position high pass filter (switched from power supply)
- 9 polar patterns (switched from power supply)
- Double shielded oxygen-free copper multicore cable with custom designed heavy duty plugs and sockets
- Supplied complete with Power Supply, 10m (30ft) Cable, SM2, Shock Mount Suspension, M2 Stand Mount 3/8"-5/8" Thread Adaptor, Custom Aluminium Flight Case
Technical Specifications
- Capsule: Externally polarised dual diaphragm 25mm (1") condenser
- Active Electronics: Thermionic impedance converter
- Pickup Pattern: Switchable Omnidirectional / Cardioid / Figure-8 in nine steps
- Frequency response: 20 Hz-20 kHz
- High Pass Filter: Switchable - flat, -15dB @ 20Hz, -21dB @ 20Hz. Cascaded first-order filters
- Output Impedance: 200 Ohms
- Sensitivity: -37dB re 1volt/pascal (14mV @ 94dB SPL) +/-2dB
- Equivalent Noise: <18 dBA ("A"-weighted per `IEC268-15)
- Maximum Output: +2dBu (@ 1% THD into 1K)
- Dynamic Range: > 113dB (per IEC268-15)
- Maximum SPL: 131dB SPL (@ 1% THD into 1K)
- Signal/Noise Ratio: > 76dB (per IEC268-15)
- Power Requirements: Dedicated Power Supply (110 ~ 120V/220 ~ 240V, 50/60 Hz)
- Packed Weight: 8.7kg (Mic only 1.044kg)
Inta Audio recommends the Rode Classic II Tube Condenser Microphone by Rode
The Rode Classic II Tube Condenser Microphone offers great value for money, features, build quality and reliability.
EURO 
GBP Login 
