Specification

Rode NTG-2 Mic, Rode SM4 Shock Mount, Rode Dead Cat Bundle

Bundled items

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the Rode NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on Rode boom poles.

The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.

NTG-2 Features:

• Broadcast sound quality. Rugged metal construction. Condenser microphone transducer. Weighing 161 grams approx. (5.17 oz.). Low noise circuitry. Low handling noise. Supplied with stand mount and Rode zip pouch. Designed & manufactured in Australia by Rode. Full 2 year guarantee.

NTG-2 Operation power:

• The Rode NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery. The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.

NTG-2 Operation output impedance:

• The Rode NTG-2 will operate satisfactorily into a load impedance as low as 1 k?. If a load below this is used, the output signal level will be reduced. The NTG-2’s output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.

Acoustic principle:

• Line plus Gradient.

Directional pattern:

• Super-Cardioid.

Frequency range:

• 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance:

• 250 Ù - phantom power, 350 Ù - battery power

Signal noise ratio din iec 651:

• 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)

Equvalent noise:

• 18 dB SPL (per IEC651, IEC268-15)

Maximum spl:

• 131 dB (@ 1% THD into 1 kÙ)

Sensitivity:

• -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)

Dynamic range din iec 651:

• 113 dB (per IEC651, IEC268-15)

Power supply voltage:

• 1.5 V Alkaline Battery or P48 Phantom

Current consumption:

• 2.0 mA

Battery life:

• >400 hours with fresh alkaline battery.

Output connection:

• 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)

Weight with battery:

• 161 g approx. (5 oz.)

Dimensions width:

• 278 mm

Dimensions depth:

• 22mm

Dimensions height:

• 22mm

Rode Dead Cat - High Wind Microphone Cover

The RODE Dead Cat is especially designed to provide wind protection for the Video Mic, NTG-1, and NTG-2 microphones. This fluffy wind shield for use in high wind situations, is acoustically transparent so the only thing you lose is wind noise!

Rode SM4 Suspension fits:

Rode NT3

Rode NT4

Rode NT5

Rode NTG-1 

Rode NTG-2

The Rode SM4 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. Perfect for the RØDE NTG series.

Features a 4-way rubber suspension system with quick release tilt mechanism to aid directional positioning and avoid visual intrusion.

This Shock Mount has the stand mount fitting for boom poles.

Inta Audio recommends the Rode NTG-2 Mic, Rode SM4 Shock Mount, Rode Dead Cat Bundle by Rode

The Rode NTG-2 Mic, Rode SM4 Shock Mount, Rode Dead Cat Bundle offers great value for money, features, build quality and reliability.

Related Products to the Rode NTG-2 Mic, Rode SM4 Shock Mount, Rode Dead Cat Bundle

Rode Boom Pole 3m               £59.31 More from Rode

Rode NTG-2 Shotgun Condenser Microphone               £128.99 More from Rode

Rode NTG-1 Shotgun Condenser Microphone               £128.08 More from Rode