Specification

Rode NTG-2 Mic, Rode SM5 Shock Mount, Rode Dead Cat Bundle

Bundled items

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the Rode NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on Rode boom poles.

The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.

NTG-2 Features:

• Broadcast sound quality. Rugged metal construction. Condenser microphone transducer. Weighing 161 grams approx. (5.17 oz.). Low noise circuitry. Low handling noise. Supplied with stand mount and Rode zip pouch. Designed & manufactured in Australia by Rode. Full 2 year guarantee.

NTG-2 Operation power:

• The Rode NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery. The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.

NTG-2 Operation output impedance:

• The Rode NTG-2 will operate satisfactorily into a load impedance as low as 1 k?. If a load below this is used, the output signal level will be reduced. The NTG-2’s output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.

Acoustic principle:

• Line plus Gradient.

Directional pattern:

• Super-Cardioid.

Frequency range:

• 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance:

• 250 Ù - phantom power, 350 Ù - battery power

Signal noise ratio din iec 651:

• 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)

Equvalent noise:

• 18 dB SPL (per IEC651, IEC268-15)

Maximum spl:

• 131 dB (@ 1% THD into 1 kÙ)

Sensitivity:

• -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)

Dynamic range din iec 651:

• 113 dB (per IEC651, IEC268-15)

Power supply voltage:

• 1.5 V Alkaline Battery or P48 Phantom

Current consumption:

• 2.0 mA

Battery life:

• >400 hours with fresh alkaline battery.

Output connection:

• 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)

Weight with battery:

• 161 g approx. (5 oz.)

Dimensions width:

• 278 mm

Dimensions depth:

• 22mm

Dimensions height:

• 22mm

Rode Dead Cat - High Wind Microphone Cover

The RODE Dead Cat is especially designed to provide wind protection for the Video Mic, NTG-1, and NTG-2 microphones. This fluffy wind shield for use in high wind situations, is acoustically transparent so the only thing you lose is wind noise!

Rode SM5 Suspension fits:

Rode NT3

Rode NT4

Rode NT5

Rode NTG-1 

Rode NTG-2

Inta Audio recommends the Rode NTG-2 Mic, Rode SM5 Shock Mount, Rode Dead Cat Bundle by Rode

The Rode NTG-2 Mic, Rode SM5 Shock Mount, Rode Dead Cat Bundle offers great value for money, features, build quality and reliability.

Related Products to the Rode NTG-2 Mic, Rode SM5 Shock Mount, Rode Dead Cat Bundle

Rode NTG-2 Mic, Rode SM4 Shock Mount, Rode Dead Cat Bundle               £176.24 More from Rode

Rode NTG-2 Mic, Rode SM3 Shock Mount, Rode Dead Cat Bundle               £176.24 More from Rode