ESI Bundle, nEar04 and SW10K
Combining the nEar04 monitors with the SW10K sub
This bundle combines the nEar04 monitors with the SW10K sub woofer. Buy these items together and save over £65.
nEar04
nEar04 is a high fidelity dual amplified bookshelf monitoring speaker system for desktop usage.
nEar04 is designed to overcome all the typical limitations of conventional small sized monitoring speakers providing a special 4" polypropylene curved woofer cone and a 1" natural silk dome tweeter.
nEar04 inherits professional monitor speaker quality from ESI's famous and extremly successful nEar05 eXperience model.
Despite the small size, nEar04 still provide reference level sound quality and enough power for audio monitoring in a digital audio production environment.
Features:
- 4" polypropylene with damped rubber surround
- 1" silk high frequency driver
- 2 TRS balanced / unbalanced inputs
- 1 speaker with amplifier, 1 speaker passive
- input sensitivity: 200 mV
- input impedance: 20k Ohm balanced, 10k Ohm unbalanced
- RF interference protection, output limiter
- overheating protection
- sub-sonic filter, external power supply
- magnetically shielded for desktop operation
- volume control on front (active side)
- frequency response: 100Hz - 22kHz
- crossover frequency: 4.1kHz
- amplifier: 2x 20W
- dimensions: 206mm (H) x 136mm (W) x 149mm (D)
SW10K
A subwoofer is an essential ingredient for many monitoring setups. Although many studio monitors such as nEar05 eXperience provide sufficient bass frequency response, adding a SW10K subwoofer will help you to provide a better picture of the low frequencies in your mix. Wheather you are producing classical 2.1 sound or 5.1 / 7.1 surround sound productions, SW10K will easily become an important part of your monitoring setup.
Features
- 10" bass reflex powered subwoofer
- amplifier power: 100W@100Hz, 4 Ohm, 0.1% THD
- dynamic power: 120W
- crossover frequency: 50Hz - 180Hz (adjustable)
- inputs: balanced XLR, unbalanced 1/4" TRS
- outputs: balanced XLR
- input impedance: 20kOhm balanced, 10kOhm unbalanced
- mute control connector (for expression pedal)
- dimensions: 384mm(H) x 354mm(W) x 384mm(D)
- weight: ca. 15 kg
Specifications.
- Type: Powered Subwoofer
- Subwoofer Driver: 10" black paper cone with high temperature voice coil and damped rubber surround.
- Frequency Response: 30Hz - 180Hz, Adjustable 50Hz – 180Hz
- Amplifier Power: 100W@100Hz, 4 ohm, 0.1% THD
- Dynamic Power: 120W
- S/N Ratio: >100dB below full output
- Input Connectors: 2 x XLR R/L Balanced Input Connector, 2 x TRS Balanced/ Unbalanced Input Connector
- Output Connectors: 2x XLR Balanced output for Satellites
- Controls : Level, Subwoofer Frequency, Satellite Frequency
- Switches : Power On/Off
- Input Impedance: 30K ohms balanced, 15K ohms unbalanced
- Input Sensitivity: 200 mV input produces full output with Input Sensitivity control at maximum.
- Protection: over temperature, shorting, an external main fuses.
- Power Requirements: Factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or 100V~50/60Hz
- Power via detachable 3 circuit line cord.
- Cabinet: vinyl laminated MDF
- Dimension (unit): 384mm(H) x 354mm(W) x 384mm(D)
- Dimension (Shipping Carton): 492mm(H) x 488mm(W) x 458mm(D)
- Net Weight: 12.5 Kg (27.5 lbs) /unit (without packing)
- Shipping Weight: 16.5 Kg (36 lbs) /unit (with shipping carton)
Inta Audio recommends the ESI Bundle, nEar04 and SW10K by ESI
The ESI Bundle, nEar04 and SW10K offers great value for money, features, build quality and reliability.
EURO 
GBP Login 
