ESI Bundle, nEar05 and SW10K
Combining the nEar05 monitors with the SW10K sub
This bundle combines the nEar05 monitors with the SW10K sub woofer. Buy these items together and save over £82.
nEar05
As upgraded version of ESI's popular nEar05 classic speakers, the nEar05 eXperience near field reference monitors have been developed especially for high level home studios and special project studios.
The nEar05 eXperience takes 5" near field monitoring speakers to a new level. They boast an ultra-flat low frequency response and the top quality Kevlar 5" driver delivers unparalleled punch in the low-mid frequency - a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound: nEar05 eXperience still features ESI's cross over control technology that is perfectly optimized and upgraded to provide the perfect output level and frequency response 100% matching the installed drivers and cabinet design. Simply copying just one feature, does not work ... this is why we recommend to trust on the original design in case you are looking at any other similar looking product in the same price range.Of course nEar05 eXperience is magnetically shielded for desktop operation next to your other electronic equipment without interference.
nEar05 eXperience is already one of the most successful near field monitoring speaker in this price range that has ever been developed.
Optionally a nEar05 eXperience based monitoring system can be expanded with a subwoofer like our SW10K.
ESI nEar05 Features:
-
integral bi-amplified 70 Watt active near-field monitor
-
5 1/4" kevlar low frequency driver
-
1" silk-dome high frequency driver
-
cross-over control optimizes performance in relation to placement
-
magnetically shielded for desktop operation
-
input connections: 1 XLR balanced & 1 TRS balanced/unbalanced
-
input sensitivity: 200 mV
-
input impedance: 30k Ohm balanced, 15k Ohm unbalanced
-
Protection : RF interference, output current limiting, over temperature, turn-on/off
-
frequency response: 60Hz - 22kHz
-
crossover frequency: 3.2 kHz
-
low frequency amplifier: 40W
-
high frequency amplifier: 30W
-
blue power LED on the front
-
dimensions: 250mm (H) x 176mm (W) x 200mm (D)
-
weight: ca. 6.5kg / speaker
SW10K
A subwoofer is an essential ingredient for many monitoring setups. Although many studio monitors such as nEar05 eXperience provide sufficient bass frequency response, adding a SW10K subwoofer will help you to provide a better picture of the low frequencies in your mix. Wheather you are producing classical 2.1 sound or 5.1 / 7.1 surround sound productions, SW10K will easily become an important part of your monitoring setup.
ESI SW10K Features
- 10" bass reflex powered subwoofer
- amplifier power: 100W@100Hz, 4 Ohm, 0.1% THD
- dynamic power: 120W
- crossover frequency: 50Hz - 180Hz (adjustable)
- inputs: balanced XLR, unbalanced 1/4" TRS
- outputs: balanced XLR
- input impedance: 20kOhm balanced, 10kOhm unbalanced
- mute control connector (for expression pedal)
- dimensions: 384mm(H) x 354mm(W) x 384mm(D)
- weight: ca. 15 kg
ESI SW10K Specifications.
- Type: Powered Subwoofer
- Subwoofer Driver: 10" black paper cone with high temperature voice coil and damped rubber surround.
- Frequency Response: 30Hz - 180Hz, Adjustable 50Hz – 180Hz
- Amplifier Power: 100W@100Hz, 4 ohm, 0.1% THD
- Dynamic Power: 120W
- S/N Ratio: >100dB below full output
- Input Connectors: 2 x XLR R/L Balanced Input Connector, 2 x TRS Balanced/ Unbalanced Input Connector
- Output Connectors: 2x XLR Balanced output for Satellites
- Controls : Level, Subwoofer Frequency, Satellite Frequency
- Switches : Power On/Off
- Input Impedance: 30K ohms balanced, 15K ohms unbalanced
- Input Sensitivity: 200 mV input produces full output with Input Sensitivity control at maximum.
- Protection: over temperature, shorting, an external main fuses.
- Power Requirements: Factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or 100V~50/60Hz
- Power via detachable 3 circuit line cord.
- Cabinet: vinyl laminated MDF
- Dimension (unit): 384mm(H) x 354mm(W) x 384mm(D)
- Dimension (Shipping Carton): 492mm(H) x 488mm(W) x 458mm(D)
- Net Weight: 12.5 Kg (27.5 lbs) /unit (without packing)
- Shipping Weight: 16.5 Kg (36 lbs) /unit (with shipping carton)
Inta Audio recommends the ESI Bundle, nEar05 and SW10K by ESI
The ESI Bundle, nEar05 and SW10K offers great value for money, features, build quality and reliability.
EURO 
GBP Login 
