Specification

Fostex PM 0.5 Studio Monitors

The Fostex PM 0.5 Studio Monitors are highly recommended by Inta Audio. To understand how truly important accurate and clear sound is, you only have to go as far as the new Fostex PM-Series Powered Monitors. With precisely calibrated bi-amped power, innovative driver construction and Fostex’s usual attention to detail, these speakers deliver a full-on bass response that’s meaty and dynamic, and a high end that sparkles with life and vitality. Breaking a new price / performance barrier, the Fostex PM-Series offer such an exceptional sound and such superb value, you’ll wonder how you can pay so little for so much.

Fostex PM 0.5 Features

• The LF drivers (PM-2: 200mm, PM-1: 160mm, PM0.5 130mm) have been developed to obtain extremely pure music reproduction by employing the latest technology in cone material.
• The cone uses a mixture of cut and milled fibers that are made from aromatic polyamide. It is then impregnated with resins to simultaneously achieve high rigidity and optimum damping.
• The cone also has an olefin film thermally adhered to its surface to control frequency response and to establish long term reliability.
• The center dust cap is made of non-wood cellulose material and is also impregnated with resin.
• The voice coil is made of super high purity copper wire to achieve extremely low distortion.
• The20mm soft dome tweeter employs Fostex’s UFLC technology (Poly Urethane Film Laminated Cloth) to achieve light weight and high stability performance.
• The amplifiers are precisely calibrated to match the performance capability of the drivers.

HF UNIT

The soft dome tweeters employ Fostex’s UFLC technology (Poly Urethane Film Laminated Cloth) to achieve light weight and high stability performance.

LF UNIT

Uses a mixture of cut and milled fibres made from aromatic polyamide impregnated with resins to simultaneously achieve high rigidity and optimum damping. An olefin film is thermally adhered to its surface to control frequency response and ensure reliability. Distortion is minimized by the use of an ultra-pure copper voice coil.

PM0.5

The ideal choice for smaller studios requiring nearfield monitoring, the perfectly formed PM0.5 offers 70 watts of bi-amped power and produces great full range performance with exceptional neutrality even at high Sound pressure levels. The compact dimensions also enable accurate placement in confined or awkward spaces, with the dispersion from the two way ported enclosure design tailored such that it will deliver a superb sound almost regardless of room acoustics. Features a UFLC 20mm soft dome HF unit and 130mm LF woofer and input gain control.

Fostex PM0.5 Specifications

• HF unit
  20mm Soft Dome
• LF Unit
  130mm Aromatic Polyamide
• Frequency Response
  Free field ± 2dB
  50Hz - 20kHz
• Low Frequency Cut-Off
  40Hz (-10dB)
• High Frequency Cut-Off
  22kHz (-10dB)
• Amp Power
  Low Frequency: 35 watts
  High Frequency: 35 watts
• Amp Distortion
  <0.01% T.H.D. @ 25w
  8 Ohm 20Hz - 20kHz
• Amp Signal to Noise
  >84dB 20Hz - 30kHz
  not weighted
• Amp Slew Rate
  15V / µ sec
• Physical Dimensions : 181w x 280h x 260d (mm)
• Weight : 6.5kg
• Power Requirement / Consumption : 230VAC, 50/60Hz - 40 watts

Inta Audio recommends the Fostex PM 05 MKII Studio Monitors by Fostex

The Fostex PM 05 MKII Studio Monitors offers great value for money, features, build quality and reliability.

Related Products to the Fostex PM 05 MKII Studio Monitors

M Audio AV40 Studio Monitors - Pair               £94.99 More from M Audio

KRK RP5 G2 - Rokit Studio Monitors               £258.75 More from KRK

Alesis M1 620 Active Studio Monitors               £299.99 More from Alesis