-
4” polypropylene-coated woofers
-
3/4” ferrofluid-cooled silk dome tweeters
-
OptImage III tweeter wave guides for superior imaging
-
20-watt-per-channel amplifier with Class A/B architecture
-
magnetic shielding
-
¼” TRS balanced and RCA unbalanced inputs
-
1/8” headphone output
-
1/8” stereo auxiliary input
-
front-panel volume control
-
rear-panel on/off control
-
bass boost control
-
MDF cabinet with bass reflex port design
-
Type: two-way desktop reference monitor
-
Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil
-
High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter
-
Frequency Response: 85Hz - 20kHz
-
Crossover Frequency: 2.7kHz
-
RMS SPL: 101.5dB @ 1 meter
-
Signal-to-Noise Ratio: > 90dB (typical, A-weighted)
-
Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input
-
Polarity: positive signal at "+" input produces outward low-frequency cone displacement
-
Dynamic Power: 20 watts continuous, per channel into 4 Ω
-
Input Impedance: 10 k Ω unbalanced, 20 k Ω balanced
-
Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum
-
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
-
Indicator: Blue power LED ring around volume knob on front panel
-
Power Requirements: 100-120V/~50/60Hz, 220-240V/~50/60Hz; powered via detachable 2-conductor line cord
-
Cabinet: vinyl-laminated MDF
-
Dimensions: 8.75" (H) x 6" (W) x 7.25" (D)
-
Weight: 14 lbs./6.34 kg